Ivoclar Vivadent Programat CS4

Programat CS4 – furnace for zirconium oxide sintering, glazing, and crystallization

Programat CS4 furnace is ideal for sintering, crystallizing, and glazing restorations in the dental office. Programat CS4 is a multi-purpose COMBO furnace for dental practice, suitable for crystallizing IPS e.max CAD and sintering of IPS e.max ZirCAD (Zirconia).

The speed sintering program allows zirconia restorations to be manufactured directly in the dental practice in a single session. A arranged membrane-sealed keypad with a graphic display enables easy operation. Both pre-set and individual programs for third-party materials are available. Programat CS4 is a stand-alone furnace that features an open system.

Advantages:

• Fast sintering of IPS e.max ZirCAD
• Crystallization of IPS e.max CAD
• Glaze program for IPS e.max ZirCAD, IPS e.max CAD, and IPS Empress CAD
• High processing capacity (up to six units)
• Open system
• Simple and language-independent operation due to the proven combination of the membrane-sealed keypad and graphic display
• Power Saving Technology
• Compact design
• Possibility of on-site temperature calibration
• OSD (Optical Status Display)
• Remote control via PC/laptop using PrograBase3 software

Key features

• The firing chamber can be heated up to 1600 ° C;
• The electronics with the corresponding software controls the sintering program;
• There is a constant comparison between the actual and the set temperature;
• The sintering table can accommodate up to 6 single restorations at the same time

Features of the model

• Fast sintering process (it is possible to manufacture ZrO2 restorations in one medical appointment, maximum – six units at a time);
• Glaze firing and crystallization (cost-saving, as usually different furnaces, are required for sintering, glaze firing, and crystallization);
• Precise temperature (precise temperature control for glaze firing, crystallization, and sintering).

Application

• Sintering and glazing of ZrO ₂ materials (eg IPS e.max ZirCAD);
• Crystallization and glazing (e.g. IPS e.max CAD).
• The Programat CS4 cannot be used as a ceramic kiln for ceramics in the dental laboratory.

Specifications

• Power supply: 118-240 V / 50-60 Hz
• Overvoltage category: II
• Pollution degree: 2
• Allowable voltage fluctuations: + – 10%
• Maximum current consumption: 16A @ 118V, 8A @ 240V
• Electrical fuses: 250 V / T 16 A (heating element)
• Fuse size: diameter 5 x 20 mm
• Closed oven dimensions: depth – 430 mm, width – 310 mm (with stand – 390 mm), height – 570 mm
• Useful chamber volume: diameter – 80 mm, height – 80 mm
• Maximum firing temperature: 1600 ° C
• Weight: bottom 10 kg, furnace head 17 kg

Equipment

• The lower part of the oven is electronically controlled;
• Furnace head with sintering chamber;
• Sintering table;
• Object stand;
• Network cable;
• Table fork;
• Cleaning brush;
• Crystallization table.

Delivery forms

• Programat CS4
• Power cord
• Sintering Furnace Temperature Checking Set Starter Kit – Operating Instructions
• Sinter tray
• Sinter tray fork
• IPS e.max Speed Crystallization Tray
• USB download cable
• var. accessories
• Instructions for Use
• Warranty Card

Reference Library

• Ivoclar Vivadent Programat CS4 Manufacturer Information
• Ivoclar Vivadent Programat CS4 Instruction for Use